Cars / e32 / Electronics / Gear Selector Switch

Gear Selector Switch

Article by: Jon Evans

Article applies to: all e24 / e28 / e30 / e32 / e34 models with an automatic transmission.

I carried out this repair ages ago. Although you could still select reverse (and all the other gears), my reversing lights didn’t work, and my passenger side rear view mirror didn’t dip.

The replacement is very easy, but a new switch will cost you £30 – £40 ($50 – $65 US).

Select first gear and remove the allen bolt from the back of the gear selector handle.

_images_articles_20030120234610480_2

Hold the lever in on the handle and remove the handle by pulling it upwards.

_images_articles_20030120234610480_3

Using a hooked tool, lift up the two far corners of the console wood trim.

_images_articles_20030120234610480_4

Select second gear and lift the far edge of the trim, then move it away from you to release the near edge.

Carefully lift the trim and turn it over, then unplug the gearbox mode switch.

_images_articles_20030120234610480_5

Remove the two allen bolts from the old switch, select neutral, and lift the switch out. Unplug it and replace it with the new switch.

_images_articles_20030120234610480_6

_images_articles_20030120234610480_7

To make it easier to put the trim back, push out the mode switch from behind before you replace the wood.

Then fish the plug from out of the hole, plug it back in and push the mode switch back in place.

_images_articles_20030120234610480_8

Replace the selector handle and screw it back on.

The old, broken switch (disassembled):

_images_articles_20030120234610480_1-1

Reassembly is the reverse order of removal.

Leave a Comment

Your email address will not be published. Required fields are marked *

*