Article by: Jon Evans Article applies to: all BMW’s Recently my steering wheel started squeaking while executing slow speed turns. The cause: old, hard grease on the slip ring for the horn contact. The fix: remove the wheel, clean up the old grease, apply new grease. Please note there is […]

Article by: Jon Evans Article applies to: all BMW’s Recently my steering wheel started squeaking while executing slow speed turns. The cause: old, hard grease on the slip ring for the horn contact. The fix: remove the wheel, clean up the old grease, apply new grease. Please note there is […]

e38 Rear Ball Joint Removal Article by: voodoomelon Article applies to all E38 models, 725/728/735/740/750 i/iL Tools needed: – Jack and axle stands – Custom ball joint removal ($25/€25) tool OR original BMW tool (big bucks, $300/€300+) – Breaker bar – Assortment of rachets with 24mm, 18mm, 16mm sockets – […]

Article by: GSXRliterbikz Article applies to: most BMW models. So the 7 I bought a few months ago needed a bearing when I bought it. Lazy person I am, I procrastinated too long. Put like 8k on it and then had to stop driving since it got too bad. All […]

Article by: Bill Rickard Article applies to: all e32 and e34 models This article will show you the process I used to remove the steering wheel in my effort to change out the dash bulbs. 1. First you disconnect the negative battery cable. This is critical. Make sure you have […]