Article by: Gerry at PhoenixMotorsport Article applies to: all e31, e32, and e38 BMW models with the M7x engine. Unfortunately, I need to apologize before I do this post because I did not keep stopping during the procedure to take photos. There is so many nuts and bolts to attend […]
Topic: Engine
Refit Intake Manifolds M70 (V12)
Article by: Gerry at PhoenixMotorsport Article applies to: all e31, e32, and e38 BMW models with the M7x engine. Unfortunately, I need to apologize before I do this post because I did not keep stopping during the procedure to take photos. There is so many nuts and bolts to attend […]
Reset Camshaft Timing on the M70 (V12)
Article by: Gerry at PhoenixMotorsport Article applies to: all M7x V12 engines (750 and 850 BMW models). OK then, the next few “How To’s” are going to be in all sorts of different order but rather than do a “How to rebuild an E31” post, I am going to section […]
Reset Camshaft Timing on the M70 (V12)
Article by: Gerry at PhoenixMotorsport Article applies to: all M7x V12 engines (750 and 850 BMW models). OK then, the next few “How To’s” are going to be in all sorts of different order but rather than do a “How to rebuild an E31” post, I am going to section […]
Banjo Bolts Install M70 (V12)
Article by: Gerry at PhoenixMotorsport Article applies to: all SOHC V12 BMW models. Ok, so continuing on from my last post on camshaft timing, I am elaborating on the delights of a BJ, (Banjo Job), that is so necessary on the V12. When I stripped down the top end of […]
Banjo Bolts Install M70 (V12)
Article by: Gerry at PhoenixMotorsport Article applies to: all SOHC V12 BMW models. Ok, so continuing on from my last post on camshaft timing, I am elaborating on the delights of a BJ, (Banjo Job), that is so necessary on the V12. When I stripped down the top end of […]