Proto Areas The DIYPNP has one proto area on the main board, and some versions have additional proto space on the adapter board. The holes in these proto areas are interconnected to make building circuits easier; connected holes are indicated by white dots in between the holes.  These proto areas […]

Extra Inputs and Outputs There’s a lot you can control with the DIYPNP beyond fuel and ignition. Exactly what you can control will depend on the code loaded. This chart shows which points on the DIYPNP can be used for what function for current, beta, and alpha code variants. The […]

Ignition Control Ignition control is one of the more involved parts of the DIYPNP installation to set up, and may take a bit of trial and error if you do not have an application guide to cover what mods you need. This page will explain the ignition control, both the […]

Sequential Injection The MS2/Extra 3.0.3 and higher code allows for 4 channel sequential injection with a DIYPNP. This can run sequential injection on a 4 cylinder, or semi-sequential on a 6 or 8. To use this, you’ll need our DP_SEQMOD-K add on board. It attaches to the 10 pin breakout […]